Aluminium

Product Code: Aluminium

Availability: Pre-Order

Price: Rs.0.00
This product has a minimum quantity of 20

Aluminium

Aluminium is as internationally traded commodity, and its prices are effectively determined by the major metals exchanges in world. Prices on this exchanges reflects the worldwide balance of Aluminium supply and demand, but from time to time they are also influenced significantly by investment flows and currency exchange rates.

It is a silvery-white, soft, nonmagnetic, ductile metal. Aluminium is the third most abundant element (after oxygen and silicon), and the most abundant metal in the Earth's crust. It makes up about 8% by weight of the Earth's solid surface. Aluminium metal is so chemically reactive that native specimens are rare and limited to extreme reducing environments. Instead, it is found combined in over 270 different minerals. The chief ore of aluminium is bauxite. Aluminium is remarkable for the metal's low density and for its ability to resist corrosion due to the phenomenon of passivation. Structural components made from aluminium and its alloys are vital to the aerospace industry and are important in other areas of transportation and structural materials. The most useful compounds of aluminium, at least on a weight basis, are the oxides and sulfates.

Available Products

Primary

Rolled

Aluminium Ingots

Hot Rolled Coils

Alloy Ingots

Hot Rolled Plates

T- Ingots

Cold Rolled Coils & Strips

Sows

Cold Rolled Sheets

Billets

Heat Treated Chequered

Wire Rods

Others

 

Size  & Specifications:

Aluminium Ingots

Type

EC Grade, CG Grade, LE registered

Size of Ingots

740mm X 170 mm X 114 mm

Weight of Ingots

22.7 +/- 1.5 Kgs each on Average

Size of Ingot Stack

740 mm X 740 mm X 1026 MM

Weight of Ingot Stack

Approx. 1000 kgs

 

Wire Rods

Type

EC Grade / Alloy / CG grade

Diameter

9.50 mm to 12.00 mm (+/- 0.5)

Coil weight

1-2.5 Tons

Coil id

550 mm, 750 mm

EC GRADE WIRE RODS

Temper

UTS (MPa)

Conductivity (%)

O

59-97

61.8

H12

83-117

61.5

H14

103-138

61.4

H16

117-

61.3

ALLOY GRADE WIRE RODS

Temper

UTS (MPa)

Condutivity (%)

O

90-159

55.0

M

147-227

53.0

       

 

 

Billets

Diameter

16 “. 20 “, 24 “, 32 “

Length range

1000 mm -6000mm

Alloy

1xxx, 2xxx,3xxx, 4xxx, 5xxx., 6xxx, 8xxx

 

Hot Rolled Coils

Alloy

1xxx, 2xxx,3xxx, 4xxx, 5xxx., 6xxx, 8xxx

Width in as rolled condition

Untrimmed range

885mm – 1620 mm

Standard

890, 965, 1240,1270, 1540, 1620 mm

Thickness

4.50 -12 mm for alloys of Al, Al- Mn, Al-Si

6-8 mm for alloys of Al-Mg, Al-Mg-Si, Al-Cu-Mg

Arbout Diameter

750 mm Without spool

Coil density

2000-4500 Kgs

Temper

M, F

Finish

Mill Finish

 

Hot Rolled Plates

Alloy

1xxx, 2xxx,3xxx, 4xxx, 5xxx., 6xxx, 8xxx

Width Range

800-1540 mm

Standard (Trimmed)

915, 1220, 1400 & 1500 mm

Standard (Untrimmed)

1270, 1540 mm

Thickness

6-200 mm for 1xxx

10-200 mm for 3xxx, 4xxx

25-200 mm for 5xxx

8-20 mm for 2xxx, 6xxx (Stretched)

Weight

Depends on Dimensions

Temper

F/M, O, H1, H111, H112, T4, T6

Finish

Mill Finish

 

Cold Rolled Coils & Strips

Alloy

1xxx, 2xxx,3xxx, 4xxx, 5xxx., 6xxx, 8xxx

Width in as Rolled Condition

Untrimmed- Range

800-1620 mm

Standard

890, 965, 1000, 1015, 1270, 1460, 1560, 1620 mm

Trimmed – Range

100-1500 mm

Standard

305, 610, 762, 915, 1000, 1009, 1220, 1321, 1500 mm

 

Thickness

Untrimmed- 0.25- 6.0 mm

Trimmed- 0.12- 2.0 mm

Arbour Diameter

Untrimmed- 1000-3000 Kgs

Trimmed- 1000-1250 Kgs

Part Coil- 250-350 Kgs

Temper

M, O, H1, H2, H3, H4

(For coils of thickness 0.12 mm-2.0 mm in trimmed

condition with coil density of 1.0-2.0 Kgs / mm width)

O, M

(for coil with untrimmed edges in heat-treatable alloys)

Finish

Mill Finish

Fin Stock, Foil stock, closure stock, Lamp Cap sock also available.

 

Cold Rolled Sheets

Alloy

1xxx, 2xxx,3xxx, 4xxx, 5xxx., 6xxx, 8xxx

Width in as rolled condition

800-1500 mm

Standard

915, 1000, 1159, 1220, 1300, 1321, 1500 mm

Length Range

1830-4350 mm

Standard

2440, 2450, 2745, 3000, 3050 mm

Thickness

0.56-4.00 mm (length & width for sheets having thickness of over 4.00 mm is subject to confirmation)

Weigh

Depends on Dimensions

Temper

O, H1, H2, H3, H4, T4, T6

Finish

Mill Finish

 

Chequered Heat Treated

Width

Range- 800-1500 mm

Standard 813, 880, 1500mm

Length

Range- 1830 -4000mm

Standard- 2440-3660 mm

Thickness

1.5-3.25mm

Alloy

6061

Temper

W, WP, M

Finish

Mill Finish

Patterns

Diamond

Balcheq

Width

Standard- 813, 915, 1220, 1500mm

Length

Range- 1830-4350 mm

Thickness

0.7-5mm

Alloy

Special, 3105

Temper

M

Baltread

Width

Standard- 813, 880, 915, 1220, 1550mm

Length

Range- 2000-4000mm

Thickness

1.0-3.25 mm

(More Thickness Can be supplied in Coil Form)

Alloy

Special, 3105

Temper

M

 

For other products please email us vickyvivek2200@gmail.com

Terms & Conditions

·         All prices in USD or INR per ton basis. Taxes, Duties & other charges extra.

·         Payment Terms will be Advance or LC at sight.

·         Containerized Shipment available.

·         Materials are supplied from India or third country depends on Availability.

·         Minimum Order quantity will be 1 container.

 

 

Write a review

Note: HTML is not translated!
Bad           Good