Your shopping cart is empty!
Aluminium
Product Code: Aluminium
Availability: Pre-Order
Price:
Rs.0.00
This product has a minimum quantity of 20
Aluminium
Aluminium is as internationally traded commodity, and its prices are effectively determined by the major metals exchanges in world. Prices on this exchanges reflects the worldwide balance of Aluminium supply and demand, but from time to time they are also influenced significantly by investment flows and currency exchange rates.
It is a silvery-white, soft, nonmagnetic, ductile metal. Aluminium is the third most abundant element (after oxygen and silicon), and the most abundant metal in the Earth's crust. It makes up about 8% by weight of the Earth's solid surface. Aluminium metal is so chemically reactive that native specimens are rare and limited to extreme reducing environments. Instead, it is found combined in over 270 different minerals. The chief ore of aluminium is bauxite. Aluminium is remarkable for the metal's low density and for its ability to resist corrosion due to the phenomenon of passivation. Structural components made from aluminium and its alloys are vital to the aerospace industry and are important in other areas of transportation and structural materials. The most useful compounds of aluminium, at least on a weight basis, are the oxides and sulfates.
Available Products
|
Primary |
Rolled |
|
Aluminium Ingots |
Hot Rolled Coils |
|
Alloy Ingots |
Hot Rolled Plates |
|
T- Ingots |
Cold Rolled Coils & Strips |
|
Sows |
Cold Rolled Sheets |
|
Billets |
Heat Treated Chequered |
|
Wire Rods |
Others |
Size & Specifications:
|
Aluminium Ingots |
|
|
Type |
EC Grade, CG Grade, LE registered |
|
Size of Ingots |
740mm X 170 mm X 114 mm |
|
Weight of Ingots |
22.7 +/- 1.5 Kgs each on Average |
|
Size of Ingot Stack |
740 mm X 740 mm X 1026 MM |
|
Weight of Ingot Stack |
Approx. 1000 kgs |
|
Wire Rods |
|||
|
Type |
EC Grade / Alloy / CG grade |
||
|
Diameter |
9.50 mm to 12.00 mm (+/- 0.5) |
||
|
Coil weight |
1-2.5 Tons |
||
|
Coil id |
550 mm, 750 mm |
||
|
EC GRADE WIRE RODS |
|||
|
Temper |
UTS (MPa) |
Conductivity (%) |
|
|
O |
59-97 |
61.8 |
|
|
H12 |
83-117 |
61.5 |
|
|
H14 |
103-138 |
61.4 |
|
|
H16 |
117- |
61.3 |
|
|
ALLOY GRADE WIRE RODS |
|||
|
Temper |
UTS (MPa) |
Condutivity (%) |
|
|
O |
90-159 |
55.0 |
|
|
M |
147-227 |
53.0 |
|
|
Billets |
|
|
Diameter |
16 “. 20 “, 24 “, 32 “ |
|
Length range |
1000 mm -6000mm |
|
Alloy |
1xxx, 2xxx,3xxx, 4xxx, 5xxx., 6xxx, 8xxx |
|
Hot Rolled Coils |
|
|
Alloy |
1xxx, 2xxx,3xxx, 4xxx, 5xxx., 6xxx, 8xxx |
|
Width in as rolled condition |
Untrimmed range 885mm – 1620 mm |
|
Standard 890, 965, 1240,1270, 1540, 1620 mm |
|
|
Thickness |
4.50 -12 mm for alloys of Al, Al- Mn, Al-Si 6-8 mm for alloys of Al-Mg, Al-Mg-Si, Al-Cu-Mg |
|
Arbout Diameter |
750 mm Without spool |
|
Coil density |
2000-4500 Kgs |
|
Temper |
M, F |
|
Finish |
Mill Finish |
|
Hot Rolled Plates |
|
|
Alloy |
1xxx, 2xxx,3xxx, 4xxx, 5xxx., 6xxx, 8xxx |
|
Width Range |
800-1540 mm |
|
Standard (Trimmed) |
915, 1220, 1400 & 1500 mm |
|
Standard (Untrimmed) |
1270, 1540 mm |
|
Thickness |
6-200 mm for 1xxx 10-200 mm for 3xxx, 4xxx 25-200 mm for 5xxx 8-20 mm for 2xxx, 6xxx (Stretched) |
|
Weight |
Depends on Dimensions |
|
Temper |
F/M, O, H1, H111, H112, T4, T6 |
|
Finish |
Mill Finish |
|
Cold Rolled Coils & Strips |
|
|
Alloy |
1xxx, 2xxx,3xxx, 4xxx, 5xxx., 6xxx, 8xxx |
|
Width in as Rolled Condition |
Untrimmed- Range 800-1620 mm Standard 890, 965, 1000, 1015, 1270, 1460, 1560, 1620 mm Trimmed – Range 100-1500 mm Standard 305, 610, 762, 915, 1000, 1009, 1220, 1321, 1500 mm
|
|
Thickness |
Untrimmed- 0.25- 6.0 mm Trimmed- 0.12- 2.0 mm |
|
Arbour Diameter |
Untrimmed- 1000-3000 Kgs Trimmed- 1000-1250 Kgs Part Coil- 250-350 Kgs |
|
Temper |
M, O, H1, H2, H3, H4 (For coils of thickness 0.12 mm-2.0 mm in trimmed condition with coil density of 1.0-2.0 Kgs / mm width) O, M (for coil with untrimmed edges in heat-treatable alloys) |
|
Finish |
Mill Finish |
|
Fin Stock, Foil stock, closure stock, Lamp Cap sock also available. |
|
|
Cold Rolled Sheets |
|
|
Alloy |
1xxx, 2xxx,3xxx, 4xxx, 5xxx., 6xxx, 8xxx |
|
Width in as rolled condition |
800-1500 mm |
|
Standard |
915, 1000, 1159, 1220, 1300, 1321, 1500 mm |
|
Length Range |
1830-4350 mm |
|
Standard |
2440, 2450, 2745, 3000, 3050 mm |
|
Thickness |
0.56-4.00 mm (length & width for sheets having thickness of over 4.00 mm is subject to confirmation) |
|
Weigh |
Depends on Dimensions |
|
Temper |
O, H1, H2, H3, H4, T4, T6 |
|
Finish |
Mill Finish |
|
Chequered Heat Treated |
|
|
Width |
Range- 800-1500 mm Standard 813, 880, 1500mm |
|
Length |
Range- 1830 -4000mm Standard- 2440-3660 mm |
|
Thickness |
1.5-3.25mm |
|
Alloy |
6061 |
|
Temper |
W, WP, M |
|
Finish |
Mill Finish |
|
Patterns |
Diamond |
|
Balcheq |
|
|
Width |
Standard- 813, 915, 1220, 1500mm |
|
Length |
Range- 1830-4350 mm |
|
Thickness |
0.7-5mm |
|
Alloy |
Special, 3105 |
|
Temper |
M |
|
Baltread |
|
|
Width |
Standard- 813, 880, 915, 1220, 1550mm |
|
Length |
Range- 2000-4000mm |
|
Thickness |
1.0-3.25 mm (More Thickness Can be supplied in Coil Form) |
|
Alloy |
Special, 3105 |
|
Temper |
M |
For other products please email us vickyvivek2200@gmail.com
Terms & Conditions
· All prices in USD or INR per ton basis. Taxes, Duties & other charges extra.
· Payment Terms will be Advance or LC at sight.
· Containerized Shipment available.
· Materials are supplied from India or third country depends on Availability.
· Minimum Order quantity will be 1 container.
